Loop-H3900 SERIESMULTI RATE

xDSL

xDSL DATA TRANSPORT RACK-CARD

Description

Loop-H3900 provides high speed digital transport over twisted copper pairs using 2B1Q technology. Versatility of this series comes from a choice of digital interfaces and a choice of data rates, with the lower data rates applicable to longer reaches. Repeaters are available for extending the reach beyond a single span.

This rack version is for central office use, while a standalone version is intended for customer premises

Features

DTE speed of n x 64 Kbps, n=1 to max n, where max n= 4, 6, 8, 12, 18, 24, 32 for 1 line, and n= 8, 12, 16, 24, 32 for 2 lines.

Distances vary by line speeds available depending on max n.

DTE interface (V.35, EIA530, X.21, RS449), or E1 interface.

Uses industry standard 2B1Q line format.

A pair of Loop-H3900 can be configured as DTE at one end and E1 at the other.

Each rack card has 12 LEDs for status.

Each rack card shares a controller card with front panel keys and 2-line by 40-character LCD display, with optional Ethernet, SNMP, and Telnet.

Each rack card can be set to be either master or slave.

Compatible with Loop-H3900 stand-alone.

y Standard compliance: For E1-HSDL, ETSI RTR/TM-03036 and ETSI TS 101 135 (formerly ETR 152) installation. Either version, installed in pairs, can provide (a) an E1 link, with E1 interfaces, (b) a high speed data link with DTE interfaces, or (c) a data access to E1 with DTE interface at one end and E1 at the other, as shown in the application illustrations.

From the shared common controller card of the rack cage, Loop-H supports configuration and diagnostics using keypads and LCD display on the front panel, or from a local or remote terminal. This enables users to execute in-service diagnostics and fault isolation.

CERTIFIED ISO-9001

Ordering Information

To specify options, choose from list below:

Where

DTE=SP=

11 for V.35 DTE interface with M34 connector kk for multi-rate 256K -2320 Kbps (1 pair) 22 for V.35 DTE interface with DB25 connector mm for multi-rate 256K -1168 Kbps (2 pairs) 33 for EIA530 DTE interface 44 for X.21 DTE interface PP= 66 for RS449/ V.36 DTE interface via conversion cable P1 for -48 Vdc 99 for E1 P3 for -48 Vdc with line power source BR for Bridge Interface P5 for -48 Vdc with sealing current source

LOOP-H3900 MULTI RATE xDSL PRODUCT SPECIFICATION (Rack Card)

E1 Interface
Line Rate	2.048 Mbps ± 50 PPM	Framing	ITU G.704
Line Code	HDB3	Connector	BNC/RJ48C
Input Signal	ITU G.703	Output Signal	ITU G.703
		Electrical	75 Coax/120 twisted pair
DTE Interface
Data Port	Single DTE
Data Rate	n x 64 Kbps

Connector EIA530, V.35, X.21, and RS449 via conversion cable

Performance Monitor (E1)

Performance Store The last 24 hours performance in 15-minute intervals and last 7 days in 24-hour summary Monitor Registers Network, E1/DTE, and remote site Performance Reports Errored Second, Unavailable Second, Severe Errored Second Alarm History Alarm Type, Loop1, Loop2, E1(LOS, ES, SES), and DTE Clock Loss Alarm Queue Maximum 40 alarm records which record the latest alarm type, and date & time

xDSL Line Interface

Full duplex with adaptive echo cancellation 2B1Q line coding Unconditioned 19-26 AWG twisted pair Line rates available 272, 400, 528, 784, 1168, 1552, 2064, or 2320

Clock xDSL looped, Internal, or E1/DTE

Console Ports on a shared Controller Card of the Rack Cage

Connector RJ-11 at front panel Electrical RS232 Protocol VT-100 Menu driven DB25 at Rear RJ-45 at Rear RS232 10Base-T Ethernet SLIP/Telnet Telnet

System Configuration Parameters (All in non-volatile memory)

Active Configuration Current working configuration Default Configuration Manufacture default configuration

Diagnostics Test

xDSL Loopback	To-DTE, To-LINE
DTE Loopback	To-DTE , To-LINE
E1 Loopback	To-E1, To-LINE
Slave Loopback	DTE-Side, LINE-Side ( through EOC and V.54 )
Physical/Electrical
Dimensions	2.7 x 29.5 x 17cm (WxHxD)
Power	7 Watts max per card without line power or 22 Watts max per card with line power
Temperature	0 / 50 °C
Humidity	0 / 95% RH (non-condensing)
Mounting	Rack card fits into Loop-C 5500 Rack cage