700 MHz Antennas

700 MHz Yagi Antenna

10 dBi gain / 12 dBi gain /
13.5 dBi gain / 14 dBi gain / 16 dBi gain

700 MHz Patch Antenna

Patch 7 dBi gain, 90 degree

700 MHz Omni-Directional Fiberglass

6 dBi gain / 8 dBi gain / 11 dBi gain

700 MHz Sector Panel Antenna

14 dBi gain, 90, Vert. polarized /
14 dBi gain, 90 Horiz. polarized /
14 dBi gain, 120 Vert. polarized / 16 dBi gain 90 Vert. polarized

700 MHz Corner Panel Antenna

15 dBi gain, 90 , Vert. Polarized / 14 dBi gain, 120 , Vert. polarized

700 MHz Vehicle Mag-Mount Omni

3 dBi gain / 5 dBi gain / 7 dBi gain

700 MHz Grid Parabolic Antenna

17 dBi gain / 19 dBi gain / 20 dBi gain / 23 dBi gain

700 MHz Specialty

Special Low Profile vehicle 2 dBi gain /

Custom Antenna Solutions


Star Antenna Products


Super Heavy Duty
Mobile Whip Antenna (pdf)

Loop Telecom Products

<<Back to Telecom Products page PDF Datasheet

DTU

Loop-U 3500/ Loop-U 500 DTU SERIES

STAND-ALONE

Description

Loop Telecom's Loop-U 3500 DTU series provides an economic solution to extend DTE interfaces over 2 copper wires up to 5.5 Km. This series uses adaptive echo cancellation to provide high quality 128 Kbps digital data transport. The Loop-U 3500 DTU series provides one DTE port, operating at synchronous rates from 1.2 to 128 Kbps and asynchronous rates to 19.2 Kbps. Co-direction is supported. This allows users to interconnect LANs and WANs, CAM video conference, mainframe hosts, and others.

Loop-U 3500 DTU series supports configuration and diagnostics from front panel LCD display and keypads or RS232 console port. This allows users to execute diagnostics and fault isolation.

This product series also provides 9 LEDs for both line side and DTE side status indicators

Ordering Information

To specify options, choose from list below:

Model

Loop-U 3500-S-DTE-pp

where:

DTE=

11 for V.35 DTE interface with M34 connector

22 for V.35 DTE interface with DB25 connector

33 for EIA530 DTE interface

44 for X.21 DTE interface

55 for RS232 DTE interface

66 for RS449 DTE interface via conversion cable

77 for RS232 subrate interface

50 for RS232 X.50 subrate interface

CD for Co-directional interface with RJ48 connector

RT for Router interface

pp = DC for 20 to 60 Vdc power source

AC for 90-264 Vac

Example

Loop-U 3500-S-11-AC=V.35 DTE interface with M34 connector. Power is 90-264 Vac.

 

CERTIFIED ISO-9001

Features:

Up to 5.5 Km distance over unconditioned 24 AWG wires.

High Speed DTE interface up to 128 Kbps synchronous, up to 19.2 Kbps asynchronous.

Co-direction: ITU G.703 64Kbps

Connection to LAN/WAN, CAD/CAM, or Host services.

2-line by 16-character LCD display, 4 keys, 9 LEDs allow front panel configuration and diagnostics.

Local or remote terminal configuration and diagnostics capabilities.

LOOP-U 3500 DTU SERIES PRODUCT SPECIFICATION (Stand-Alone)

Line Interface

Type Full duplex with adaptive echo cancellation

Line Coding 2B1Q

Line Type Unconditioned twisted pair 19-26 AWG

Surge Protection Meets FCC Part 68 Subpart D

Connector RJ48

Customer DTE Interface

Number of Port 1

Data Rate 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 48, 56, 64, 112 and 128 Kbps synchronous,

up to 19.2 Kbps asynchronous.

Connector as order: V.35, EIA530, X.21, RS232, RS449 via conversion cable

Co-directional Interface

Interface

ITU G.703 64 Kbps co-directional interface

Connector

120ohm, RJ48

Line Distance

Up to 500 meters

Loopback

DTE Payload Loopback, DTE to Line Loopback

LED

3 LEDs: each for SYNC, LOS, and TEST

Router Interface

Number of ports

1 LAN ports, Max. 2 WAN ports

Physical Interface

10/100 BaseT x 1

Connector

RJ45

Supporting routing protocol

RIP-I, RIP-II

Data Rates

Channelized up to 128 Kbps

Supporting Protocols

TCP/IP, PPP, HDLC

Management

VT-100

Clock source Internal, Line, or DTE

Diagnostics Test

Loopbacks Payload Loopback, Local Loopback, DTE Loopback, Remote Loopback ,

and remote DTE Loopback ( only EIA530 supports ITU-T V.54 )

Test Pattern PRBS 2047

Console Port

Connector RJ-11 at Front Panel

Electrical RS232 interface

Protocol Menu driven VT-100 terminal

Front Panel

Keypad 4 keys: Left arrow, Right arrow, ESC, and ENTER

LCD 2 lines by 16 characters

LED 9 LEDs: POWER, LINE [SYNC, TEST, ALARM], DTE [TEST, TD, RD, RTS, CLK-LOSS]

Physical/electrical

Dimensions 22 x 6 x 29 cm, 81/2” x 21/4” x 111/4” (WxHxD)

Power 20-60 Vdc / 90-264 Vac, 5 watts

Temperature range 0-50C

Humidity 0-95% (non-condensing)

Mounting Desk-top stackable

Compliance

ANSI T1.601, ITU-T V.11, V.28, ETSI ETR080, ITU-T V.54